it's a simpler bust version of another 'full size' figurine that i made that you can print 'out of the box'.
original scale size (mm):
it is 110mm tall , 104mm diameter base.
model print tested with this parameters (for FDM version):
0.4mm nozzle, ABS 1.75mm 0.18mm layer (0.15mm will be even better), 2 perimeters, 10% infill, infill where needed.
the angle of the throat/head of the panther were bigger for an easiest print
I added a special ' for Resin(SLA) printer' Model ( hollow with 2mm thickness, with 2 holes to prevent the specific problem of the suction effect of the resin )
The sla model was not tested (i didn't have a SLA printer) but i didn't think there is a problems with it. If any, tell me and i will do the changes if needed.
WARNING : use the proper STL for your printer (the one with SLA in the name is for SLA printer, the other is for FDM printer)
special note: truly Optimized for FDM printers - No support Needed.