"Grant me a wish, my beautiful star ! "
This model is in 2 parts : the faerie and the shooting star. the star will be printed flat, and you can glue it in a notch in the floor behind the faerie.
you can print them without any support.
The faerie can be printed at 70 % of the scale without problem for a faster print.
Don't go under or you can get problem with the wings.
tested with slic3r 1.2.9 and simplify 3d
recommanded parameters :
0.15mm layer height, 15% infill, 2 perimeters for the Faerie
0.2mm layer height, 10% infill, 2 perimeters for the shooting star
i made a little error and put the assembled STL (faerie+star together) in the archive. It's corrected with the new version 1.01 (each part separated)